RSGB Band Plan (effective from 1st January 2024)
	The following band plan is largely based on that agreed at IARU Region 1 General Conferences with some local differences on
	on frequencies above 430 MHz.
	2.3 GHz (13cm)	Necessary	UK Usage
	IARU Recommendation	Bandwidth
	2,310.000-2,320.000 MHz
	Sub-regional	200 kHz	2,310.000-2,310.500 MHz   Repeater links
	(National band plans)
			2,311.000-2,315.000 MHz   High speed data
	2,320.000-2,320.800	2.7 kHz	Preferred Narrowband Segment
			2,320.000-2,320.025 MHz   Moonbounce
			2,320.200 MHz                      SSB centre of activity
			2,320.750-2,320.800 MHz   Local Beacons, 10W erp max
	2,320.800-2,321.000		2,320.800-2,320.990 MHz   Propagation Beacons only
	Beacons exclusive
	2,321.000-2,322.000	20 kHz	FM/DV    - see also Note 1
	2,322.000-2,350.000		Wideband Modes, including data, ATV
	2,390.000-2,400.000		All modes
	2,400.000-2,450.000		2,435.000 MHz                      ATV repeater outputs
	Satellites		2,440.000 MHz                      ATV repeater outputs
	Note 1:   Stations in countries which do not have access to the all modes section 2,322-2,400 MHz, may use the
	segment 2,321-2,322 MHz for data transmission.
	Note 2:   Stations in countries that do not have access to the narrow band segment 2,320-2,322 MHz, use the alternative narrow
	band segments 2,304-2,306 MHz, 2,308-2,310 MHz and 2400-2402 MHz
	Note 3:  The segment 2,433-2,443 MHz may be used for ATV if no satellite is using the segment.
	LICENCE NOTES:   Amateur Service - Secondary User: Users must accept interference from ISM users.
	Amateur Satellite Service: 2,400-2,450 MHz - Secondary User:   Users must accept interference from ISM users
	Operation in 2310-2350 and 2390-2400 MHz are subject to specific conditions and guidance
	Note specific conditions apply within 50km of SS206127 (Bude) or SE202577 (Harrogate).
	ISM = Industrial, scientific and medical.
	Notes to the Band Plan
	ITU-R Recommendation SM.328 (extract)
	Necessary bandwidth: For a given class of emission, the width of the frequency band which is just sufficient to
	ensure the transmission of information at the rate and with the quality required under specified conditions.
	The use of Amplitude Modulation (AM) is acceptable in the all modes segments but users are asked to consider
	adjacent channel activity when selecting operating frequencies.
	Foundation and Intermediate Licence holders are advised to check their licences for the permitted power limits and
	conditions applicable to their class of licence.